Exactly as described. Packaged well and functions perfectly.

I recently changed a water pump on a 2000 Corvette that is equipped with an aftermarket ProCharger supercharger. In removing all of the pulleys and belts of the supercharger as well as the stock GM ones, I came to realize that several of the pulleys had play in them. In other words, I could slightly manipulate back and forth the axis of the pulleys by hand even though they were bolted down tightly. Buying brand new pulleys, particularly the two that are only made by the pro charger supercharger company, which are about $100 a piece, seemed like an unnecessary expense. I tapped the existing pulleys out using nothing more than a vice to hold them, a large hammer and a 6 in Long half inch ratchet extension. I then pressed the new bearings into the pulleys with the vise cleanly and smoothly without tapping them with a hammer. So instead of paying somewhere in the neighborhood of $400 or $500 for new pulleys, I paid $13 for 10 bearings and everything seems to be great now.

Fit the same as original. Be sure they seated fully before installing spindle.

For the price, these can't be beat. I needed new bearings for my mower deck spindle. A new spindle was only $18, but once I found out how cheap these replacement bearings were, I went this route instead. I opened them up when I received them and they are well made inside and were adequately greased. I did add a bit more grease to them while I had them open. They worked perfectly in my mower deck spindle. Now I have 8 others left over as spares for my other spindles when they fail down the road. Good Quality parts. Excellent Value!